프로젝트 전반적 내용 정리

2020년 9월

라즈베리파이로 무선 AP 만들기

2020년 10월

zigbee 통신신호 스니핑을 위한 nordic sniffer 설치

(설치 링크: https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-desktop/Download#infotabs)

Flash the firmware

  1. Download and install nRF Connect for Desktop.
  2. Click Add/remove apps and install Programmer application.
  3. Plug the dongle to USB port and click reset button to enter DFU mode. Red diode should start blinking.
  4. Select Nordic Semiconductor DFU Bootloader device from the list.
  5. Click Add HEX file and select nrf802154_sniffer_dongle.hex from nrf802154_sniffer directory.
  6. Verify that the selected application begins at the 0x00001000 address to avoid overwriting the MBR section.

  1. Click Write to flash the device.

  2. Unplug the dongle from the USB port and plug it again. Do not click the reset button

Install the script

To find the correct installation path of the extcap utility on any system please see: (wireshark 켜서)

"Help" -> "About Wireshark" -> "Folders" -> "Extcap path"